SeaWolf 660 12,000L Upgrade Kit

£195.00

Enquire Now

Price Excluding VAT & Shipping

SeaWolf 660 Dive Light Upgrade Kit

Note this upgrade kit is applicable only at point of sale/manufacture

An alternative upgrade is available to those of you who already own the light but this requires returning for reprogramming and the purchase of two batteries, your old batteries will still be compatible and means that you then have a second swap out so you can dive twice in a row without recharge.

The 660 runs for 50 minutes on full burn providing 12000 lumens through an interchangeable push fit optic which is available as 60, 90 or 120 degrees. The unit can be charged from the rear in around 2.5hrs or has the option of swapping batteries quickly via the push off pull on locking clasps. The lock mechanism is via T handle quick release pins. The ball joint fittings have multiple fixing points along both bars allowing you to tailor the weight and feel or indeed mount as an on-board or fit to your person.

The unit is fully compatible with all Orcalight add-ons and enhancements

The Upgrade kit doubles the battery capacity and includes 2 additional optics not included in the standard package.

We need to install the upgrade here at Orcalight but the outcome is a 12,000 lumen unit that will run at full burn for 1.66 hours

There is a weight increase of 300g however for the additional battery.

 

Technical Specification after Upgrade

  • 3 switch settings of 4000, 8,000 & 12,000 lumens
  • Run times 3.75 hrs @ 4000 2.6 hr @ 8000 1.6 hours @ 12,000
  • 1 x 100W additional Li battery (flight Ready)
  • Battery swap out or charge from rear
  • Range of 2 additional optics from 60, 90 or 120 degrees
  • Weight in fresh water 850g
  • Depth rating 150m
  • Dry weight 2.8Kg

 

Optional extras available individually based on preference

Alternative lamp heads are available allowing the user to change from the existing LED wavelength to any other from Ultra Violet right through the spectrum to Infra Red. Changing involves 4 screws and takes around 2 minutes.

The 660 can be changed to a top side film light running from the SSL cable which accepts 12-48Vdc by simple swapping over the back plate or can run top side, depending on ambient temperature the unit may drop to 8000 lumens after an unspecified period.

The 660 can be changed to an umbilical powered torch using the SSL by swapping the back plate and sliding out the batteries, doing so makes the light slightly bouyant which is countered by the umbilical. Overall depending on user preference the 660 when umbilically powered from 48Vdc is around neutral in weight.

Get in touch to order a SeaWolf 660 or discuss your diving light needs. We’re always ready to help you decide the right package for you.

Your Name (required)

Your Email (required)

Subject

Your Message

Enter the code below...
captcha