SeaWolf EX30 Dive light


Enquire Now

Price Excluding VAT and Shipping

SeaWolf EX30 Light weight Hand Held Torch

Only 250 Gramms Underwater

Technical Specification

3 switch settings of 10000, 20,000 & 30,000 lumens
Run times 1.45 hrs @ 10000 1 hr @ 20000 45 minutes @ 30,000
2 x 100W Li battery (flight Ready)
Battery swap out no charge from rear
Range of optics from 60, 90 or 120 degrees
Carbon Fiber + 6082 grade aluminium with >70 microns hard annodise
Weight in water 250g

What’s In The Package?

Shipped in cardboard box you will receive
1 standard SeaWolf Ex30 with handle kit fittings
1 optic of your choice
1 charger

2 x 100W Li Batteries

Optional extras available individually based on preference

Additional batteries allow full swap out

Additional chargers allow charging in parallel 1 charger and battery takes 2.5hrs

Alternative optics can be swapped out of water

Alternative lamp heads are available allowing the user to change from the existing LED wavelength to any other from Ultra Violet right through the spectrum to Infra Red. Changing involves 4 screws and takes around 2 minutes.

The EX30 can be changed to a top side film light running from the SSL cable which accepts 48Vdc by simple swapping over the back plate

The EX30 can be changed to an umbilical powered torch using the SSL by swapping the back plate and sliding out the batteries, doing so makes the light slightly buoyant which is countered by the umbilical. Overall depending on user preference the EX30 when umbilical powered from 48Vdc is around neutral in weight.

Alternatively the EX30 can be connected to our standard canister pack, in doing so you can remove the batteries making the light positive in water providing a stabilizing affect when used on arms attached to a camera. doing so also increases the run time and to counter the weight of the canister users can choose canisters from 200mm 300mm or 400mm in length taking up to 2 4 or 6 batteries. by reducing batteries and increasing canister length the weight can be diminished.

To calculate run times each battery is 100W at full burn each battery is equal to 22.5 minutes.

Get in touch to order a SeaWolf EX30 or discuss your diving light needs. We’re always ready to help you decide the right package for you.

Your Name (required)

Your Email (required)


Your Message

Enter the code below...


Seawolf Ex30 Dive Light is a Light weight expedition torch

Fits SSL Mains cable

Fits SSU underwater Shore supply cable

Fits ALL Orcalight canisters

The Ex 30 is a truly lightweight high powered versatile unit unlie anything on the market.

Standard specifications, 30000 lumens for 45 minutes, 20000 lumens for 1hr or 10000 lumens for 1.45hrs from switch setting 1 2 or 3

Weight in water 250g depending on fittings

accepts 60 90 or 120 degree optics

Can contain u to 2 batteries or batteries can be removed and unit powered from shore supply or canisters to make it positive buoyancy in water adding a bonus stabilizing effect when attached to camera rigs.